Використання a мультиметр до міра двигун швидкість
Звичайний трифазний білка клітка двигуни мають дві швидкості: один is синхронний швидкість N1. The так званий синхронний швидкість is the speed of the motor's обертання магнітне поле. /point;
J——the frequency of the current, the number of cycles/second;
P - the number of pole pairs of the motor.
The second is the asynchronous speed, that is, the speed of the motor shaft. When the electric motor drives the production machinery, the rotational speed of the motor shaft is
The обертальна швидкість of the обертання магнітне поле is незначно lower, but it is is almost the same. For example, for a pair of magnetic pole motors, the обертання швидкість of the двигун колесо is 2950 об/хв, 1430 об/хв для a двополюсний мотор, і 920 об/хв для a триполюсний мотор. Відповідно до вище принципи, a мультиметр може бути використано до судді число з магнітних полюсів полюсів з двигуна 2c і потім визначити швидкість of двигун.
The method of using a multimeter to judge the number of pole pairs of the motor is as follow:
1. Fold off the six wire ends of the motor;
2. Use the ohm block of the multimeter to find any phase of the three-phase winding, as shown in the figure 1~2;
3. Turn the milliampere gear of the multimeter to the smallest gear, and connect its two wires to terminals l~2;
4. Поворот двигун вал повільно, і спостерігати те зміна of the покажчик of the мультиметр. If the обертання вал обертання обертання один коло і покажчик гойдалки раз, it означає that the струм зміни for one cycle, and it is a pair of magnetic poles; if it swings twice, it is two pairs of magnetic poles; if it swings three times, it is three pairs of magnetic poles.
