Як to use the oil lens in the microscope?
(1) До використання масло об'єктив, ви повинні перший спостерігати через низький і високий потужність лінза, і потім переміщення спостереження ціль частина до центр з поле з вигляду.
(2) Raise the light collector to the the highest position and open the aperture to the maximum.
(3) Turn the objective lens converter so that the high-magnification lens leaves the light hole, drop a drop of cedar oil or BASO lens oil on the slide to be observation, then slowly turn the oil lens, and watch horizontally from the side when switching the oil lens The distance between the lens and the glass slide, so that the lens can be immersed in the oil without crushing the the скло гірка.
(4) Спостерігати окуляр з ліворуч око 2c і повільно повертатися тонкий фокус гвинт доти об'єкт зображення is clear. Якщо є є об'єкт зображення або ціль є не ідеальний, ви потреба до пошук знову. Коли перезнахідка зовні заправка площа, ви повинні слідувати процедура: низьке збільшення→high magnification→oil lens. Коли повторне знаходження в заправка площа, ви повинні слід процедура: низьке збільшення → масло лінза, і до не пройти через високе збільшення лінза до до запобігання масло від забруднення лінза.
(5) After the oil lens is used, if you use cedar oil, you need to wipe off the cedar oil on the lens and the specimen with a little xylene on the lens tissue, and then wipe it with dry lens tissue; while BASO advanced microscope oil lens The oil just need to be wiped off with ordinary lens tissue!
